2005 R1100S
BoxerCup Replika
 That's
Not Just Your Heartbeat Racing
Now in its 2nd year, the BoxerCup race
held at Daytona International Speedway continues to grow in
popularity. Now behold the newest rendition of the R1100S,
the 2005 BoxerCup Replika. From the new three-tone paint scheme
to the exuberant sound of the standard Laser exhaust,
this is a machine that inspires all the senses. The taut sport
suspension and a modified front end geometry that allows
an even greater lean angle will urge you to push your skills
to a higher level. Only a small number of these
stunning motorcycles will be produced for the US market,
expected to arrive in May. If you've been waiting for just
the bike to bring out the racer in you, get your request
in early. It can get pretty crowded at the starting line!
Power train
The BoxerCup Replika engine remains unchanged for 2005. Featuring
2 Spark ignition, the 1085cc engine generates 98bhp at 7,500
rpm and 70 lb ft of torque at 5,750 rpm.A notable change to
the exhaust system is the use of an exhaust pipe by Laser.
Standard equipment on the 2005 Replika,
the Laser exhaust will generate a deeper, throatier tone.
A closed-loop 3-way catalytic converter is still in place
for compliance with emissions requirements. The 6-speed transmission
remains unchanged.
Frame & Suspension
The 2005 Replika now sports the same suspension found on BoxerCup
Replika race bikes. By utilizing front fork tubes from the
R1150GS, the chassis of the 2005
Replika is raised by 12mm, thus allowing for a greater lean
angle. Seat height on the 2005 BoxerCup Replika is 860 mm
(33.9 inches). Front spring travel is 4.3" (110 mm) and
rear spring travel is 5.1" (130 mm) with spring strut
pre-load adjustable by a hand-wheel.
Brakes
The braking system is unchanged from 2004.
Please note that ABS will not be available on the 2005 BoxerCup
Replika.
2005 BoxerCup Replika
• Front Brakes
Two, four-piston fixed calipers
• Front Rotors 12.6 inch dual floating rotors
• Rear Brake Single, two-piston floating caliper
• Rear Rotor 10.9 inch single, fixed rotor
Dimensions
2005 BoxerCup Replika
• Fuel 4.7 gallons
• Seat Height 33.9 inches
• Dry Weight 459 lbs
• Wet Weight (ready to ride) 505 lbs
Body and Colors
The new 2005 BoxerCup Replika has an updated graphics package
that includes, three-tone paint, sponsor stickers and carbon
fiber reinforced plastic (CFRP) cylinder head covers and engine
spoiler.
Standard Equipment
Additional standard equipment on the 2005 BoxerCup Replika
includes:
• 5.5" Rear Wheel
• Clear Turn Signal Lenses
• Pillion Seat Cover
• Side Stand
Only limited
numer of BoxerCup Replikas will be produced for the US market.
They will begin arriving in dealerships in May.
|
